F. Barbe, S. Forest, and G. Cailletaud, Intergranular and intragranular behavior of polycrystalline aggregates. Part 2: Results, International Journal of Plasticity, vol.17, pp.537-563, 2001.

A. Hor, N. Saintier, C. Robert, T. Palin-luc, and F. Morel, Statistical assessment of multiaxial hcf criteria at the grain scale, International Journal of Fatigue, vol.67, pp.151-158, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01057879

D. L. Mcdowell, Simulation-based strategies for microstructure-sensitive fatigue modeling, Materials Science and Engineering, vol.468, pp.4-14, 2007.

H. Proudhon, J. Li, F. Wang, A. Roos, V. Chiaruttini et al., 3D simulation of short fatigue crack propagation by finite element crystal plasticity and remeshing, International Journal of Fatigue, vol.82, pp.238-246, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01237651

S. Basseville, G. Cailletaud, T. Ghidossi, Y. Guilhem, E. Lacoste et al., Numerical analysis on the local mechanical fields in polycrystalline 316ln stainless steel under cyclic fatigue loading: Comparison with experimental results, Materials Science and Engineering: A, vol.696, pp.122-136, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01518940

F. ?i?ka, S. Forest, P. Gumbsch, and D. Weygand, Finite element simulations of the cyclic elastoplastic behavior of copper thin films. Modelling and Simulation in, Materials Science and Engineering, vol.15, pp.217-238, 2007.

H. Lim, H. J. Bong, S. R. Chen, T. M. Rodgers, C. C. Battaile et al., Direct numerical simulations in solid mechanics for quantifying the macroscale effects of microstructure and material model-form error, JOM, vol.68, pp.1427-1445, 2016.

H. Lim, L. Dingreville, T. Deibler, C. Buchheit, and . Battaile, Investigation of grain-scale microstructural variability in tantalum using crystal plasticity-finite element simulations, Computational Materials Science, vol.117, pp.437-444, 2016.

D. Colas, E. Finot, S. Forest, S. Flouriot, M. Mazière et al., Investigation and modelling of the anomalous yield point phenomenon in pure tantalum, Materials Science and Engineering, vol.615, pp.283-295, 2014.

W. Wasserbach, Work-hardening and dislocation behaviour of tantalum and tantalum alloys. The minerals, Metals and Materials Society, 1996.

M. N. Norlain, Comportement mécanique du tantale, texture et recristallisation. PhD thesis, Travaux non-publiés, 1999.

C. Kerisit, Analyse de recristallisation statique du tantale déformé à froid pour une modélisation en champ moyen, 2012.

F. Buy, Prise en compte de la vitesse de déformation et de l'histoire de chargement, 1996.

S. Frénois, Modélisation polycristalline du comportement mécanique du tantale. Application à la mise en forme par hydroformage, 2001.

Y. Guilhem, S. Basseville, F. Curtit, J. M. Stephan, and G. Cailletaud, Numerical investigations of the free surface effect in three-dimensional polycrystalline aggregates, Computational Materials Science, vol.70, pp.150-162, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01017647

J. Cheng, A. Shahba, and S. Ghosh, Stabilized tetrahedral elements for crystal plasticity finite element analysis overcoming volumetric locking, Computational Mechanics, vol.57, pp.733-753, 2016.

F. E. Houdaigui, S. Forest, A. Gourgues, and D. Jeulin, On the size of the representative volume element for isotropic elastic polycrystalline copper, IUTAM Symposium on Mechanical Behavior and Micro-Mechanics of Nanostructured Materials, pp.171-180, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00148578

F. Barbe, R. Quey, A. Musienko, and G. Cailletaud, Three-dimensional characterization of strain localization bands in high-resolution elastoplastic polycrystals, Mechanics Research Communications, vol.36, pp.762-768, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00423757

A. Zeghadi, F. Nguyen, S. Forest, A. Gourgues, and O. Bouaziz, Ensemble averaging stress-strain fields in polycrystalline aggregates with a constrained surface microstructure-Part 1: Anisotropic elastic behaviour, Philosophical Magazine, vol.87, pp.1401-1424, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00513781

A. Zeghadi, S. Forest, A. Gourgues, and O. Bouaziz, Ensemble averaging stress-strain fields in polycrystalline aggregates with a constrained surface microstructure-Part 2: Crystal plasticity. Philosophical Magazine, vol.87, pp.1425-1446, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00513782

K. S. Zhang, J. W. Ju, Y. L. Bai, and W. Brocks, Micromechanics based fatigue life prediction of a polycrystalline metal applying crystal plasticity, Mechanics of Materials, vol.85, pp.16-37, 2015.

M. Bouchedjra, T. Kanit, C. Boulemia, A. Amrouche, M. El-amine et al., Determination of the RVE size for polycrystal metals to predict monotonic and cyclic elastoplastic behavior: Statistical and numerical approach with new criteria, European Journal of Mechanics -A/Solids, vol.72, pp.1-15, 2018.

T. Kanit, S. Forest, I. Galliet, V. Mounoury, and D. Jeulin, Determination of the size of the representative volume element for random composites : statistical and numerical approach, International Journal of Solids and Structures, vol.40, pp.3647-3679, 2003.

C. Gerard, Mesures de champs et identification de modèles de plasticité cristalline, 2008.

Y. Guilhem, S. Basseville, F. Curtit, J. M. Stephan, and G. Cailletaud, Investigations of the effect of grain clusters on fatigue crack initiation in plycrystals, International Journal of Fatigue, vol.32, pp.1748-1763, 2010.

J. Besson, G. Cailletaud, J. Chaboche, S. Forest, and M. Blétry, Non-Linear Mechanics of Materials, Solid Mechanics and Its Applications, vol.167, 2009.

L. Méric and G. Cailletaud, Single crystal modeling for structural calculations. Part. 2 : finite element implementation, Journal of Engineering Materials and Technology, vol.113, pp.171-182, 1991.

V. Eyraud, M. H. Nadal, and C. Gondard, Texture measurement of shaped material by impulse acoustic microscopy, Ultrasonics, vol.38, pp.438-442, 2000.

T. Hoc, J. Crépin, L. Gélébart, and A. Zaoui, A procedure for identifying the plastic behavior of single crystals from the local response of polycrystals, Acta Materialia, vol.51, pp.5477-5488, 2003.

H. Lim, J. D. Carroll, C. C. Battaile, T. E. Buchheit, B. L. Boyce et al., Grainscale experimental validation of crystal plasticity finite element simulations of tantalum oligocrystals, International Journal of Plasticity, vol.60, pp.1-18, 2015.

F. Kroupa, Plastic deformation of BCC metals with special reference to slip geometry, 1967.

V. Vitek, Theory of the core structures of dislocations in body centred cubic (BCC) metals. Crystals lattice defects, vol.5, pp.1-34, 1974.

C. Hennessey, G. M. Castelluccio, and D. L. Mcdowell, Sensitivity of polycrystal plasticity to slip system kinematic hardening laws for Al 7075-T6, Materials Science and Engineering A, vol.687, pp.241-248, 2017.

P. Mccormick, Theory of flow localisation due to dynamic strain ageing, Acta Metallurgica, vol.36, pp.3061-3067, 1998.

S. Zhang, P. Mccormick, and Y. Estrin, The morphology of portevin-le chatelier bands: finite element simulations for Al-Mg-Si, Acta Materialia, vol.49, pp.1087-1094, 2000.

S. Graff, S. Forest, J. L. Strudel, C. Prioul, P. Pilvin et al., Strain localization phenomena associated with static and dynamic strain ageing in notched specimens: experiments and finite element simulations. Material Science and Engineering A, pp.181-185, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00018967

M. Marchenko, M. Mazière, S. Forest, and J. L. Strudel, Crystal plasticity simulation of strain aging phenomena in alpha-titanium at room temperature, International Journal of Plasticity, vol.85, pp.1-33, 2016.

S. Ren, M. Mazière, S. Forest, T. F. Morgeneyer, and G. Rousselier, A constitutive model accounting for strain ageing effects on work-hardening. Application to a C-Mn steel, Comptes Rendus Mécanique, vol.345, pp.908-921, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01678853

Z. Package, Non-linear material & structure analysis suite, www.zset-software.com, 2013.

H. Lim, J. D. Carroll, C. C. Battaile, B. L. Boyce, and C. R. Weinberger, Quantitative comparison between experimental measurements and CP-FEM predictions of plastic deformation in a tantalum oligocrystal, International Journal of Mechanical Sciences, vol.92, pp.98-108, 2015.

A. Marais, M. Mazière, S. Forest, A. Parrot, and P. L. Delliou, Identification of a strain-aging model accounting for luders behaviour in a C-Mn steel, Philosophical magazine, vol.92, pp.3589-3617, 2012.

H. D. Wang, C. Berdin, M. Mazière, S. Forest, C. Prioul et al., Portevin-le chatelier (PLC) instabilities and slant fracture in c-mn steel round tensile specimens, Scripta Materialia, vol.64, pp.430-433, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00579436

L. Allais, M. Bornert, T. Bretheau, and D. Caldemaison, Experimental characterization of the local strain field in a heterogeneous elastoplastic material, Acta Metallurgica and Materialia, vol.42, pp.3865-3880, 1994.
URL : https://hal.archives-ouvertes.fr/hal-01579363

S. Suresh, Fatigue of Materials, 1998.

A. F. Bower and K. L. Johnson, The influence of strain hardening on cumulative plastic deformation in rolling and sliding contact, Journal of the Mechanics and Physics of Solids, vol.37, pp.471-493, 1989.

D. L. Mcdowell, Stress state dependence of cyclic ratchetting behavior of two rail steels, International Journal of Plasticity, vol.11, pp.397-421, 1995.

M. Zhang, R. W. Neu, and D. L. Mcdowell, Microstructure-sensitive modelling: Application to fretting contacts, International Journal of Fatigue, vol.31, pp.1397-1406, 2009.

M. , A. , and N. Ohno, Kinematic hardening model suitable for ratchetting with steady-state, International Journal of Plasticity, vol.16, pp.225-240, 2000.

S. Bari and T. Hassan, Anatomy of coupled consitutive models for ratchetting simulation, International Journal of Plasticity, vol.16, pp.381-409, 2000.

J. L. Chaboche and J. Lemaitre, Mécanique des matériaux solides, 2008.

S. Sinha and S. Ghosh, Modeling cyclic ratcheting based fatigue life of hsla steels using crystal plasticity fem simulations and experiments, International Journal of Fatigue, vol.28, pp.1690-1704, 2006.

L. Priester, Grain Boundaries: From Theory to Engineering, Springer Series in Materials Science, vol.172, 2013.

J. Tong, L. G. Zhao, and B. Lin, Ratchetting strain as a driving force for fatigue crack growth, International Journal of Fatigue, vol.46, pp.49-57, 2013.

D. Colas, Approche multi-échelles du vieillissement et du comportement mécanique cyclique dans le tantale, 2013.

S. Manchiraju, S. Asai, and . Ghosh, A dual-time-scale finite element model for simulating cyclic deformation of polycrystalline alloys, The Journal of Strain Analysis for Engineering Design, vol.42, pp.183-200, 2007.

H. Lim, H. J. Bong, S. R. Chen, T. M. Rodgers, C. C. Battaile et al., Developing anisotropic yield models of polycrystalline tantalum using crystal plasticity finite element simulations, Materials Science and Engineering: A, vol.730, pp.50-56, 2018.